Sennheiser SKP 30 - Handbuch (Seite 56)

58
22 Error checklist
Problem Possible cause
No operation indication ț Battery is flat
No RF signal ț Transmission frequency is not the same
as the receivng frequency
ț Transmitter is out of range
RF signal available but ț Transmitter is muted (“MUTE”)
no audio signal ț Receiver’s squelch threshold adjusted
too high
ț Transmitter does not supply phantom
powering to condenser microphone
(
u “18 Switching the phantom
powering on/off (PHAnto)”, page 51)
Audio signal noisy ț Transmitter sensitivity adjusted too
low
ț Receiver’s AF output level adjusted too
low
Audio signal distorted ț Transmitter sensitivity adjusted too
high
ț Receiver’s AF output level adjusted too
high
̈ If problems occur that are not listed in the above table, please
contact your local Sennheiser agent for assistance.