SMC Networks SMC Barricade SMC7004VWBR - Handbuch (Seite 26)

I
NSTALLATION
2-10
Attach the Wireless Barricade to the Internet
If Internet services are provided through an xDSL or cable modem, use
unshielded or shielded twisted-pair Ethernet cable (Category 3 or greater)
with RJ-45 plugs to connect the broadband modem directly to the WAN
port on the Wireless Barricade.
Figure 2-6. Making WAN Connection
Note: When connecting to the WAN port, use 100-ohm Category 3, 4 or
5 shielded or unshielded twisted-pair cable with RJ-45 connectors
at both ends for all connections.
Connecting the Power Adapter
Plug the power adapter into the power socket on the Wireless Barricade,
and the other end into a power outlet. Check the indicator marked Power
on the front panel to be sure it is on. If the Power indicator does not light
up, refer to Troubleshooting in Appendix A.
RESET 9 V 2 A MAX 9 V 2 A MAX WAN LAN1 LAN2 LAN3 LAN4
ISP
(Primary)
DSL/Cable
Modem