12 troubleshooting 13 technical data – Topcom BUTLER M1250 Benutzerhandbuch
Seite 28

17
Topcom Butler M1250/Twin/Triple/Quattro
Topcom Butler M1250/Twin/Triple/Quattro
f) Recording outgoing message
•
Press ‘9’ to start recording
•
Say your message.
•
Press ‘5’ to stop recording.
g) Turning answering machine on/off
•
Press the '8 ' key to switch on the answering machine.
•
If you hear one beep it’s turned on, two beeps = off.
12 Troubleshooting
13 Technical Data
Range:
up to 300 m in open space
up to 50 m in buildings
Dialling options:
DTMF (tone) and Pulse
Batteries:
2 x 1.2V, 600 mAh AAA Type NiMH rechargeable
Max. standby time:
approx. 120 hours
Max. talk time:
12 hours
Ambient temperature:
+5 °C to +45 °C
Permitted relative air humidity:
25 to 85 %
Power supply base adapter:
220/230V , 50 Hz
Memories
50 with max. 20 digits and 12 characters
Problem
Possible cause
Solution
No Display
Batteries not charged
Check the position of the
batteries
Recharge the batteries
No dialling tone
Telephone cable not
properly connected
Check the connection
of the telephone cable
Volume of conversation
partner too low
Adjust the volume during the
conversation by pressing the up/
down keys
Handset ringer volume too low
Adjust the ringer volume
Not possible to dial a number
Wrong dial mode
See “Setting dial mode” to set
the correct dial mode
Recording will be automatically interrupted after 40 seconds