Zanussi ZWF 1022 Benutzerhandbuch

Seite 12

Advertising
background image

• Remove the drawer. Push the drawer edge outwards

where indicated by the arrow (PUSH) to facilitate

drawer removal.

The flap is down and you wish to use powder detergent:

• Rotate the flap up-

wards. Ensure to fit the

flap completely in.

• Carefully put the draw-

er back.

• Measure out the deter-

gent.

• Pour the powder deter-

gent into the main wash
compartment .

The flap is up and you wish to use liquid detergent:

• Rotate the flap down-

wards.

• Carefully put the draw-

er back.

• Measure out the detergent.

For the quantity of detergent, refer always to what

is written on the product packing and ensure that

the detergent can be poured in the drawer.

• Pour the liquid detergent in the compartment

without exceeding the limit indicated in the flap. The

detergent must be placed in the appropriate com-

partments of the dispenser drawer before starting the

wash programme.

Warning! Do not use the flap in "DOWN" position

with:

• Gelatinous detergent or thick detergent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the washing programme

doesn't start immediately.

In all above listed cases, use the flap in "UP" posi-

tion .

Measure out the fabric softener

Pour fabric softener or any

additives into the com-
partment marked (do

not exceed the «MAX»

mark in the drawer). Any

additives must be placed

in the appropriate com-

partments of the dispenser

drawer just before starting

the wash programme.

Close the detergent dispenser drawer

Set your washing programme

The control panel permits to select a washing programmes and different options.

When an option button is selected, the corresponding pilot light is on. Otherwise it is off.

For compatibility among washing programmes and options, see the "Washing Programme Chart". If an incorrect

option is selected, the integrated red pilot light of the button 6 flashes 3 times.

12

Advertising