VEGA VEGAPULS 63 (≥ 2.0.0 - ≤ 3.8) Foundation Fieldbus - Handbuch (Seite 57)

Diagramm Abgleich
Die folgende Abbildung zeigt die Funktion des Abgleichs.
Secondary_value_1
Calibration
Lowest Point
Calibration
Highest Point
Sensor_value
cal_level_lo
cal_level_hi
Calibration
Lowest Point
Calibration
Highest Point
Sensor reference plane
cal_level_lo [%]
cal_level_hi [%]
Abb. 35: Abgleich VEGAPULS 63
Parameterliste
Die folgende Liste enthält die wichtigsten Parameter und ihre Bedeutung:
l
primary_value
-
Process value after min/max-adjustment and linearization. Selected as input to AIFB by setting
'C
hannel' = 1. Unit derives from 'Primary_value_unit'
l
primary_value_unit
-
Selected unit code for "primary_value"
l
secondary_value_1
-
Value after min/max-adjustment (level + level offset). Selected as input to AIFB by setting
'C
hannel' = 2. Unit derives from 'Secondary_value_1_unit'
l
secondary_value_1_unit
-
Selected unit code for "secondary_value_1"
l
secondary_value_2
-
Sensor value + sensor offset. Selected as input to AIFB by setting 'Channel' = 3. Unit derives
from 'Secondary_value_2_unit'
l
secondary_value_2_unit
-
Unit code of 'Secondary_value_2'
l
sensor_value
-
Raw sensor value, i.e. the uncalibrated measurement value from the sensor. Unit derives from
'S
ensor_range.unit'
l
sensor_range
-
'S
ensor_range.unit' refers to 'Sensor_value', 'Max/Min_peak_sensor_value', 'Cal_point_hi/lo'
l
simulate_primary_value
l
simulate_secondary_value_1
l
simulate_secondary_value_2
l
device_status
VEGAPULS 63 • Foundation Fieldbus 57
10 A nhang
28451
-DE
-120525