2 boot settings configuration, 3 security, Boot settings configuration -28 – Asus P6T SE Benutzerhandbuch
Seite 84: Security -28, Kapitel 3, Quick boot [enabled, Full screen logo [enabled, Add on rom display mode [force bios, Bootup num-lock [on, Wait for ʻf1ʼ if error [enabled

3-28
Kapitel 3: BIOS-Setup
Kapitel 3
3.8.2
Boot Settings Configuration
Quick Boot [Enabled]
Diese Funktion beschleunigt den Start des Systems, indem manche Einschaltselbsttests
(POST) ausgelassen werden. Das BIOS führt alle POST-Elemente aus, wenn [Disabled]
gewählt wurde. Konfigurationsoptionen: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Hier können Sie die Anzeige eines Vollbildschirm-Logos aktivieren oder deaktivieren. Wählen
Sie [Enabled] für dieses Element, um die ASUS MyLogo™ 2-Funktion zu verwenden.
Konfigurationsoptionen: [Disabled] [Enabled]
Add On ROM Display Mode [Force BIOS]
Hier können Sie den Anzeigemodus für optionales ROM einstellen. Konfigurationsoptionen:
[Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Hier können Sie den Num-Lock-Status beim Systemstart festlegen. Konfigurationsoptionen:
[Off] [On]
Wait for ʻF1ʼ If Error [Enabled]
Bei Einstellung auf [Enabled] wartet das System auf das Drücken der F1-Taste, wenn Fehler
auftreten. Konfigurationsoptionen: [Disabled] [Enabled]
Hit ʻDELʼ Message Display [Enabled]
Bei Einstellung auf [Enabled] zeigt das System Press DEL to run Setup (Entf drücken, um
Setup aufzurufen) während des POSTs an. Konfigurationsoptionen: [Disabled] [Enabled]
Boot Settings Configuration
Quick Boot
[Enabled]
Full Screen Logo
[Enabled]
AddOn ROM Display Mode
[Force BIOS]
Bootup Num-Lock
[On]
Wait For ‘F1’ If Error
[Enabled]
Hit ‘DEL’ Message Display
[Enabled]
BIOS SETUP UTILITY
Boot
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
3.8.3
Security
Die Elemente im Sicherheits-Menü gestatten Ihnen, die Systemsicherheits-einstellungen
zu ändern. Wählen Sie das gewünschte Element aus und drücken Sie anschließend die
<Eingabetaste>, um die Konfigurationsoptionen anzeigen zu lassen.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Passward
BIOS SETUP UTILITY
Boot
<Enter> to change
password.
<Enter> again to
disable password.