Sony FWD-S47H1 - Handbuch (Seite 38)

A2-10
GXD-L52H1
Code Table (2-a)
[a]Function [b]Range/Switch code Command
Control Enquiry Standby Power On
0x00 Contrast 0x00-0x64 Yes Yes Disable Enable
0x01 Brightness 0x00-0x64 Yes Yes Disable Enable
0x02 Chroma 0x00-0x32 Yes Yes Disable Enable
0x03 Phase 0x00-0x64 Yes Yes Disable Enable
0x04 Color Temp 0x00 Cool Yes Yes Disable Enable
0x01 Neutral
0x02 Warm
0x03 Custom
0x09 Sharpness 0x00-0x14 Yes Yes Disable Enable
0x0A NR 0x00 OFF Yes Yes Disable Enable
0x01 Low
0x02 Mid
0x03 High
0x0B Cinema Drive 0x00 Auto Yes Yes Disable Enable
0x01 OFF
0x0C Dynamic Picture 0x00 OFF Yes Yes Disable Enable
0x01 ON
0x02 Reserve
0x0E Gamma Correct (Refer to Appendix 3 “Picture/Sound”.)
0x10 Picture Mode 0x00 Standard Yes Yes Disable Enable
0x01 Vivid
0x02 Custom
0x05 TC Control
0x06 Conference
0x11 Brightness Boost *1 (Refer to Appendix 3 “Picture/Sound”.)
GXD-L52H1 is not used this command.
0x12 Option Gamma (Refer to Appendix 3 “General Function”.)
FWD-S42H1/S47H1 and GXD-L65H1 are not used this command.
0x30 Volume 0x00-0x64 Yes Yes Enable Enable
0x31 Treble *2 0x00-0x64 Yes Yes Disable Enable
0x32 Bass *2 0x00-0x64 Yes Yes Disable Enable
0x33 Balance 0x00-0x64 Yes Yes Disable Enable
0x34 Surround 0x00 OFF Yes Yes Disable Enable
0x01 Hall
0x02 Simulate
0x35 Sound Mode 0x00 Dynamic Yes Yes Disable Enable
0x01 Standard
0x03 Custom
0x36 Default Volume Set 0x00-0x64 Yes Yes Enable Enable
0x37 Volume Select 0x00 Last Memory Yes Yes Enable Enable
0x01 Default Setting
0x38 Max Volume Set 0x32 50 Yes Yes Enable Enable
0x46 70
0x64 100
*1 Picture Mode = Vivid Only is Enabled.
*2 Sound Mode = Custom Only is Enabled.