Id talk, 1. default setting, 2. setting items – Sony FWD-S47H1 Benutzerhandbuch
Seite 17

3-1
GXD-L52H1
ID Talk is set as described below. ID Talk is a protocol for operating the function of this unit via a net-
work.
3-1. Default
Setting
Item Description
Transport TCP
Port number
53484 (Factory setting)
TCP connection time-out
30 seconds (Factory setting)
3-2. Setting
Items
The items that can be set to ID Talk are shown in the table below.
Item Description
Start ID Talk Service
Select the check box when using ID Talk. Clear the check box when using no ID Talk.
(default setting: OFF)
Port No.
Changes the port number. A port number have to change port number 53484 cannot
be used because it has been already used for another purpose.
Timeout
Specify the timeout time of connection.
Connection is automatically disconnected when communication is not done for the
specifi ed time.
IP address of client
Executes only the request from the specifi ed IP address.
(Host Address)
ID Talk does not have the security function such as user authentication. During
installation, safety can be improved by setting this item.
Multiple host addresses can be set.
Community
Changes the community of a header. Four (upper-or-lower case) alphanumeric
characters can be set.
(default setting: SONY)
Set the items described above properly on the SETUP
→ ID Talk page of the Web page when using ID
Talk.
Enter the SETUP page using the user name and password below.
. User name: root
. Password: pudadm
Section 3
ID Talk