Sony FWD-S47H1 - Handbuch (Seite 32)

A2-4
GXD-L52H1
Code Table(1-a)
[a]Function [b]Range/Switch Code Command
Control Enquiry Standby Power On
0x81 Power On Delay (Refer to Appendix 3 “General Function”.)
GXD-L52H1 is not used this command.
0x82 Audio Delay (Refer to Appendix 3 “General Function”.)
GXD-L52H1 is not used this command.
0x83 IP Address (Player) (Refer to Appendix 3 “General Function”.)
GXD-L52H1 is not used this command.
0x85 Power On Batch (Refer to Appendix 3 “General Function”.)
GXD-L52H1 is not used this command.
0x86 HD15 Out (Refer to Appendix 3 “General Function”.)
GXD-L52H1 is not used this command.
0x89 Light Sensor (Refer to Appendix 3 “General Function”.)
GXD-L52H1 and FWD-S42H1/S47H1 are not used this command.
0x8A RGB Signal (Refer to Appendix 3 “General Function”.)
GXD-L52H1 and FWD-S42H1/S47H1 are not used this command.
0x8B Warm Up Mode (Refer to Appendix 3 “General Function”.)
GXD-L52H1 and FWD-S42H1/S47H1 are not used this command.
0x8C Warm Up Time (Refer to Appendix 3 “General Function”.)
GXD-L52H1 and FWD-S42H1/S47H1 are not used this command.
0x8D Picture Mute (Refer to Appendix 3 “General Function”.)
*1: Auto Signal Detect becomes Disable. When Option Slot is connected, Option command is Enable.
*2: Digital Signal Status is Enable for Digital Input Signal Detect Function only in Stable.
*3: Digital Signal or VIDEO Signal is Enable. Return Signal Status of Active Window.
*4: Only the panel power supply is turned off at the standby when setting it “ON”.
2. Analog Signal Detect Function
(a) Mode Control
Syntax Header Category Function Data1 Data2 Check Sum
Enquiry 0x83 0x00 Code Table (1-a) [a] Code Table (1-d) 0xFF 0xXX
Answer Header Answer Return to Data Size Return Data1 Data2 Check Sum
Enquiry 0x70 0x00 0x02 Code Table (1-a) [b] 0xFF 0xXX Completed
Code Table (1-a)
[a]Function [b]Range/Switch Code Command
Control Enquiry Standby Power On
0x78 Analog Signal Detect 0x00 VIDEO No Yes Disable Enable
0x01 PC
Code Table (1-d)
Input Select
0x00 Main
0x01 Sub
0xFF Present input
1-a[b]
When input is no signal or not supported signal, return value become
Video (0x00).