6 cleaning, 2 drip stop function, 3 making another jug of fresh coffee right away – Philips Café Gourmet Kaffeemaschine Benutzerhandbuch
Seite 7

7
3
Make sure the water tank cover is in place and
its lid is open.
4
Fill the water tank with cold water again by
pouring the water against the temperature
sensor in the centre of the cover (Fig. 12).
D
Note:
If you do not pour the water against the
sensor, cold instead of hot water starts flowing
into the filter.
5
You can now brew fresh coffee again.
6 Cleaning
B
Warning:
Never immerse the appliance in water or any
other liquid.
B
Warning:
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
1
Switch off and unplug the appliance.
2
Clean the outside of the appliance with a
moist cloth.
3
Clean the jug, its lid, the filter holder and the
water tank cover in hot water with some
washing-up liquid or in the dishwasher.
4
Clean the rubber insert in the outflow
opening of the water tank every month and
after every descaling procedure (Fig. 13).
Do not forget to put the insert back into
place before you use the appliance again.
B
Warning:
Never remove the rubber insert if there is still
hot water in the water tank.
B
Warning:
Make sure the jug lid is in place. Without the
jug lid, the drip stop function (see section
‘Drip stop function’ in this chapter) is activated
automatically.
9
Press the on/off switch to switch on the
appliance (Fig. 8).
10
When all the water has passed through
the filter, you can take out the jug of the
appliance (Fig. 9).
11
After you have poured coffee, put the jug with
the remaining coffee back onto the hotplate
to keep the coffee hot and to preserve its
flavour. The coffee is kept hot until you switch
off the appliance (Fig. 10).
• However, coffee is at its best directly after
is has been brewed (Fig. 11).
E
Tip:
When the brewing process is finished, you
can pour the hot coffee into a thermos jug to
keep it hot and fresh.
5.2 Drip stop function
The drip stop function enables you to remove
the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the
drip stop stops the flow of coffee into the jug.
D
Note:
The brewing process does not stop when you
remove the jug. Place back the jug with its lid as
soon as possible to prevent overflowing.
5.3 Making another jug of fresh
coffee right away
If you want to make another jug of fresh coffee
right away, follow the procedure below:
1
Switch off the appliance and let it cool down
for 3 minutes.
D
Note:
If you do not let the appliance cool down,
water starts flowing into the filter right away.
2
Put a new amount of ground coffee in a new
paper filter.
ENGLISH