Philips Performer Staubsauger mit Beutel - Handbuch (Seite 13)

2 Take out the HEPA 13 filter.
3 Put the new filter in the appliance.
4 Press the filter grille home to lock it (‘click’).
Note: Make sure that the filter grille is properly closed.
Tip: For optimal results, replace the HEPA 13 filter every 2 years. If you want
to minimise the impact on the environment, you can wash the HEPA 13 filter.
To wash the HEPA 13 filter, follow the instructions below.
1 Rinse the HEPA 13 filter under a hot slow-running tap.
Never clean the filter with a brush.
2 Carefully shake the water from the surface of the filter. Let the filter
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
Ordering accessories
If you have any difficulties obtaining dustbags, filters or other accessories
for this appliance, please contact the Philips Consumer Care Centre in your
country or consult the worldwide guarantee leaflet.
Ordering dustbags
- Philips s-bag ® ultra long performance dustbag lasts 80% longer
than standard dustbags. Their 5 litres capacity and multi-layer, non-
clogging material maintain excellent suction power throughout the
entire lifetime of the bag. Available under type number FC8027.
- Philips s-bag ® classic long performance dustbags last 50% longer
than standard dustbags, thanks their non-clogging material. Available
under type number FC8021.
English 13