ADAM Audio S6X - Handbuch (Seite 10)

10
4.4 Driver Gain
Whereas the ‘Input Gain’ raises or lowers the
overall input sensitivity up to +/-10 dB, the
‘Driver Gains’ work only within the corresponding
frequency range, raising or lowering from +/-2 to
+/-6 dB.
4.5 High / Low Shelf EQs
The other two controls operate in a different
manner. The ‘High’ and ‘Low’ controls are shelving
filters that progressively lower or raise frequencies
below 150 Hz / above 6 kHz up to 6 dB (see Fig.).
4.6 Bass EQ Section
There are three fully parametric EQs (20 Hz to 200
Hz) that can be used to combat standing waves
in the control room. The EQs can be bypassed
individually or as a group so that their overall
effect can be analyzed in direct comparison to the
unaffected signal.
4.7 LED Dim
All LED indicators can be dimmed if necessary by
pressing the ‘LED Dim’- button.
4. Speaker Adjustment
Room EQ <150 Hz for low
frequencies below 150 Hz Room EQ >6 kHz for high
frequencies above 6 kHz