ADAM Audio P22A - Handbuch (Seite 15)

15
Eng
lish
Woofer 1
Basket ø 8.5“ / 215 mm Nomex®
ART Tweeter 1
Diaphragm area 2830 mm 2 / 4.5 inch 2
Equivalent diaphragm ø 60 mm / 2.5“
Speed transformation ratio 4:1
Diaphragm weight 0,17 g
Built-in amplifiers 2 (Class 1)
AC Voltage
100-120V~, 50/60Hz *3
220-240V~, 50/60Hz *3
Woofer channel (*1 / *2) 100 W / 150 W
Tweeter channel (*1 / *2) 100 W / 150 W
Control Panel
Input Sensitivity ±10 dB
Low shelve > 6 kHz ± 6 dB
High shelve < 150 Hz ± 6 dB
Tweeter gain ± 4 dB
General Data
Frequency response 38 Hz - 35 kHz
Crossover frequency 1800 Hz
THD >80 Hz at 90 dB in 1 m ≤ 1%
Short time sine wave acoustic output at 1
m, 100 Hz - 3 kHz ≥110 dB
Max. peak acoustic output in 1 m per pair ≥120 dB
Impedance 10 kΩ
Height x Width x Depth 430 x 260 x 340 mm
Weight 13 kg (28.7 lb.)
Warranty 5 years
Input XLR
Operating temperature 0° C bis 40° C (32° F bis 104° F)
Storage temperature -30° C bis 70° C (-22° F bis 167° F)
Humidity Max. 90% not condensing
*1 = long term IEC 265-8-Wrms / 10 min
*2 = nominal IEC 265-8 = Peak Power 5 µsec
*3 = pay attention to the selected voltage on the rearside of the speaker
11. Technical Data
ADAM P22A - active 2-ways bass reflex loudspeaker