ADAM Audio S4VA - Handbuch (Seite 4)

Manual S4VA - page 4 of 12
The Front Panel
The Front Panel Controls allow the speaker to be adapted to different listening and
room requirements. There are controls for:
INPUT GAIN (Input sensitivity) ±10 dB, 0 dB for medium sensitivity
HIGH GAIN (Tweeter gain) ±4 dB, 0 dB for fl at response
MID GAIN (Midrange gain) ±2 dB, 0dB for fl at response
Room EQ >6kHz Shelve Filter with 6 kHz cut off frequency
Room EQ <150Hz Shelve Filter with 150 Hz cut off frequency
INPUT GAIN:
To adapt to different signal levels, the voltage that is needed
to drive the unit to its maximum SPL (sound pressure level), is
variable in a ±10 dB range.
The voltage gain of the tweeter amplifi er and thus the complete tweeter level can
be varied in a ±4 dB range. This can cause a considerable change in the sound
characteristic and should be used with caution. If there is a considerably damped
room or if there is a special taste you are after this control will serve you well.
HIGH GAIN