ADAM Audio ARTist 3 Wall Mount Bracket - Handbuch (Seite 6)

6
3.1 Assembling the speaker bracket
a) Turn the preassembled wall mount in your
hands so that you can see the screw heads of
the side arm facing up.
b) Attach the T-shaped plate (with the ‘T’ facing
up) onto the smaller plate of the wall mount
by using the two shorter socket screws and
washers.
*A3X owners: Please read the first note at the bottom of this page.
**F5 and F7 owners: Please read the second note at the bottom of this page.
3.2 Attaching the speaker bracket to the wall
Required tools: drill, level, pencil
Required material: 2 wall anchors or molly bolts (as appropriate), 2 dowels (not
included)
a) Find a location on the wall where you wish to mount the wall plate, ensuring that
it is vertical. Mark the drill holes with a pencil.
b) Drill the holes for the wall plugs, insert them and attach the wall plate to the wall.
Please note:
*Due to limited space on the rear panel of the A3X models you have to attach
the T-shaped plate with the ‘T’ facing down onto the smaller plate of the wall mount to be able to
connect the mains cable to the A3X speaker.
**The two wall mount screw holes on the rear of the F5 and F7 models are not horizontally but
vertically aligned. This makes the use of the T-shaped speaker holding plate and the adapter plate
obsolete. You can mount the F5 and F7 onto the smaller plate of the side arm directly.
Please check the walls before installation to ensure that you choose appropriate bolts or anchors
in diameter.
3. Installation