Scarlett SC-1141 - Handbuch (Seite 4)

www.scarlett-europe.com SC-1141 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the
mains voltage in your home.
· For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
· Do not use outdoors.
· Always unplug the appliance from the power supply before cleaning and when not in use.
· To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids.
· Close supervision is necessary when it is used near children.
· Do not leave the appliance switched on when not in use.
· Do not use other attachments than those supplied.
· Do not operate after malfunction or cord damage.
· Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning
appliance in the nearest service center only.
· Keep the cord away from sharp edges and hot surfaces.
· Do not pull, twist, or wrap the power cord around appliance.
· Never attempt to take food or liquid out from the container when the blade is moving. Always wait until the
motor stops completely.
· Do not overload the appliance with a food.
· The appliance operates fast and effective. Do not operate continuously for more than 1 min.
· Never place hot ingredients into processor (> 70 ºC)
.
FOOD PROCESSOR ASSEMBLING
· Before the first using, wash all removable parts in warm soapy water, rinse thoroughly and dry. Wipe the
housing with a damp cloth.
· Never immerse motor body in any liquid or wash under running water.
· Place the bowl on a level surface.
ATTACHMENTS
CUTTING KNIFE
· Fit the cutting knife on the drive spindle.
· Load products to be processing in the bowl.
· Attach the lid on top of the bowl then the motor unit onto the lid.
NOTE: you must complete assembling fully; otherwise you cannot switch on device.
FOOD PROCESSOR USING
· Please make sure accessories are at their places before switching on.
· Plug-in device.
· Press down the motor unit. At the same time push TURBO button to intensify processing.
· When processing is finished, switch off, and then unplug the appliance and wait the motor will stop
before removing a food and attachments.
CLEANING AND CARE
· Switch off and unplug the appliance.
· Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm soapy
water after each use. Dry all accessories with a clean soft cloth.
· Wipe housing with a damp cloth.
· Do not use scouring pads, abrasive and harsh detergents.
· Wash the processor bowl and the lid with warm soapy water, rinse under running water and dry.
· DO NOT IMMERSE THE MOTOR UNIT IN ANY LIQUID OR IN A DISHWASHER.
CAUTION: The blades are extremely sharp and therefore dangerous. Handle with caution!
STORAGE
· Be sure that the appliance is unplugged.
· Complete all requirements of Chapter CLEANING AND CARE.
· Keep the appliance in a dry clean place.
RUS
· ,
, , .
· .
.
· .
· , .
· ,
.
· .