THORENS TEP 302 - Handbuch (Seite 12)

Operation
12
Once the TEP 302 is properly set up, the unit is fully functional
after switching it on.
Please consider that it takes around 50 hours of operation until the
TEP 302 reaches its full sonic quality.
Ambience �
Adjust the brightness of the blue illuminated Thorens logo at the front
panel by jiggering the rotary switch
� (see drawing at p. 7).
Switching on/off
Push the power button on the front panel to switch the unit on and
off. While the appliance is turned on, the blue Thorens writing is il-
luminated.
Always turn on the TEP 302 first and the amplifier(s) afterwards. For
shutting down the system, repeat the steps in reverse order.
Ultimately put on a record and slowly increase the volume at the
amplifier.
When the needle touches the record you may
hear some cracking noises.