AUDIOLINE Watch&Care V132 - Handbuch (Seite 22)

Operating the Receiver
Check the transmitter and receiver are working properly each time before the equipment is put into
operation.
Switching the receiver on/off
Press and hold this button until the logo appears first then the image being taken by the
transmitter camera.
Press and hold the button for approx. 1 second to switch the unit off.
In the case of a low battery charge, the Power LED flashes slowly. Place the receiver in the charger
to recharge the battery pack.
Setting the volume
Use these buttons to adjust the volume to one of five settings or “Off”.
Setting the brightness
Press the button once.
This icon appears in the display.
Use these buttons to adjust the brightness to one of five settings.
Temperature option (setting the display unit)
In the lower right hand corner the temperature in the baby’s room is shown.
IMPORTANT INFORMATION The ideal temperature for a baby to sleep is 16° - 18 °C. Please set or
adjust the room temperature accordingly.
Press the button twice.
This icon appears in the display.
Use these buttons to set temperature measurement to °C or °F.
Temperature option (setting the range)
You can adjust the upper and lower limit for the temperature monitor. An alert will occur if the tempe-
rature becomes outside the preset temperature range.
Press the button three times (lower limit) or four times (upper limit).
Lo / Hi
This icon appears with the current setting in the display (Lo = lower limit / Hi = upper
limit).
Operating the Receiver
6