AUDIOLINE Watch&Care V131 - Handbuch (Seite 9)

7
Registration
For operation you will have to register your transmitter (camera) to
your Audioline Watch&Care V130/132:
1 Switch the transmitter off (switch set to OFF). Remove the
batteries of the receiver for a few seconds if necessary.
2 Switch the receiver on.
3 Press the menu key repeatedly until [C1] appears in
the display.
4 Use the buttons to select the desired camera [C1] ...
[C4].
5 Press the button briefly. The Link LED flickers for ap-
prox. 10 seconds. During this time, you must perform steps 6
and 7.
6 Switch the transmitter on (switch set to ON).
7 Press the registration key on the rear of
the transmitter. After a short time the
video from the transmitter will appear
on the screen if the registra tion was
successful.
If the registration failed, “Out of Range“
appears on the screen.
Putting the unit into operation