AUDIOLINE Baby Care 10 - Handbuch (Seite 24)

24
4 Operation
Powering on/off the baby monitor
After having connected the baby monitor you will have to
switch on both units.
Press and hold down the On/Off key on each unit.
Once communication is established the Link LED comes on.
To switch off the unit press and hold down the On/Off key .
Volume
You can adjust the volume at which you hear your baby by
using the keys and on the parent unit.
You can adjust the volume at which your baby hears you by
using the keys and on the baby unit.
Power on, Link and battery indicator (parent unit)
The green LED will indicate that the unit is on and functio-
ning. The flashing green LED will indicate that the contact to
the baby unit is lost. In addition you will hear a continuous
beep.
The red LED indicates that the batteries are running low and
need to be charged. In addition you will hear short beeps.
During charging the LED flashes red.
The parent unit will work approx. 5 hours when there is no
connection to the mains supply.