Xoro HRS 8560 - Handbuch (Seite 57)

7 1
Engl
ish
Initial Installation
Preparation:
If you have more than one antenna or one
antenna with more than one LNB, you will
have to know which type of switch
(Toneburst or DISEqC) is employed and
to which port is each Antenna LNB con-
nected.
For a Unicable/SCR EN50494, you will
have to know which IF-Channel is avail-
able and its corresponding Frequency.
Please ask the installer, if any of the parameter is
not known. If you live in a rental house or apart-
ment, please ask the renter.
Example for Germany:
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as follow-
ing:
Satellite:
019.2E Astra 1H.
LNB Type: 09750/10600
LNB voltage: 13/18V
22KHz: AUTO
Tonebust: None
DiSEqC 1.0/1.1: None
Motor: None
Dish Setup-preparation
You will have to be informed of following points to make a successful channel scanning.
Towards which sagellite does your
antenna orient?
The most satellite antennas orient satellite ASTRA 19.2 ° and have a “universal” or “Digital”
LNB. We recommend the pre installed list in the case.