Florabest FTP 400 C2 - Handbuch (Seite 4)

4
GB IE CY
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has been
checked for quality and subjected to a final
inspection. The functionality of your equip-
ment is therefore guaranteed. It cannot be
ruled out that residual quantities of water
or lubricants will remain on or in the equip-
ment/hose lines in isolated cases. This is not
a fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating and
safety instructions. Use the product
only as described and for the appli-
cations specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Areas of Application
The submersible water pump acquired by you
is designed for pumping water with a maxi-
mum temperature of 35°C. This pump can be
used e.g. to empty basins and tanks.
This equipment is not suitable for commercial
use. Commercial use will invalidate the guar-
antee.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer shall not be liable
for damages caused by use other than for
which the equipment is intended or by incor-
rect operation.
Content
Introduction .................................4
Areas of Application ....................4
General Description ......................5
Scope of Delivery ..............................5
Overview .........................................5
Functional description ........................5
Technical Data ..............................5
Performance data ..............................6
Notes on Safety ...........................6
Symbols in the manual .......................6
Explanation of symbols ......................6
General notes on safety .....................6
Start-up .......................................8
Assembly .........................................8
Connection of the pressure line ...........8
To erect/suspend ..............................9
Controls before operational start-up .....9
Operation ....................................9
Mains connection ..............................9
Switching on and off .......................10
Working ........................................10
Maintenance and Cleaning .........10
General cleaning instructions ............10
To replace the backflow stop ............11
To clean the paddle wheel ...............11
Storage ......................................11
Waste Disposal and
Environmental Protection ...........11
Guarantee .................................12
Replacement parts/Accessories ..12
Repair Service ............................14
Service-Center ............................14
Importer ....................................14
Faults - Causes - Remedies .........15
Translation of the original
EC declaration of conformity ......44
Exploded Drawing .....................45