Storage, Inserting/removing the scale filter insert – Silvercrest SWK 3000 EDS B2 Benutzerhandbuch
Seite 24

21
SWK 3000 EDS B2
GB
In the event of scale deposits:
Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
■
Before descaling, remove the scale filter insert
(see chapter “Inserting/
removing the scale filter insert”).
■
Use a descaler designed for household appliances (e.g. for coffee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.
■
After descaling, rinse the appliance with lots of clean water.
Inserting/removing the scale filter insert
1) Open the lid.
2) Press the tab on the scale filter insert slightly downwards and then pull the
scale filter insert
inwards and downwards so that you can pull it out of its
mounting.
3) Then pull the scale filter insert upwards and out of the kettle.
4) Clean the scale filter insert with a slightly moistened dishcloth and under
running water.
5) After cleaning, insert the scale filter insert again. Ensure that it is sitting
correctly in its mounting, and that the tab has clicked into place.
NOTE
►
If the scale deposits in the scale filter insert
have solidified, place the
filter in a water-vinegar solution at a ratio of 6:1 for a few hours. The scale
deposits will dissolve themselves. Rinse the scale filter insert
with plenty
of clear water.
Storage
■
Allow the appliance to cool down completely before putting it into storage.
■
Wind the power cable around the cable winder under the base .
■
Store the appliance at a dry location.