Esc t n – Star Micronics CBM-820 Benutzerhandbuch
Seite 70
– 59 –
ESC T n
[Function]
Selects Character Print Direction in Page Mode
[Code]
ASCII
ESC T
n
Hexadecimal
1B
54
n
Decimal
27
84
n
[Range]
0
n
3, 48
n
51
[Outline]
This command specifies the character printing direction and start point in the page mode. The
character printing direction is specified with n.
n = 0, 48 :
¤
(Start point at upper left: A)
n = 1, 49 :
“
(Start point at lower left: B)
n = 2, 50 :
'
(Start point at lower right: C)
n = 3, 51 :
«
(Start point at upper right: D)
[Caution]
• If the printing direction is specified or changed, the subsequent characters will have different
printing direction and start point(upper left, lower left, lower right, or upper right), depending
on a value of n.
• Only setting is valid in the standard mode.
• If n is beyond the range, this command will be ignored.
[Default]
n = 0
A
¤ ¤ ¤ ¤ ¤ ¤ ¤
D
¤¤¤¤¤¤¤
C
¤
¤
¤
¤
¤
¤
¤
B
¤¤¤¤¤¤¤
Paper Feed Direction