Esc c 4 n – Star Micronics CBM-820 Benutzerhandbuch
Seite 72
– 61 –
ESC c 4 n
[Function]
Selects No-paper Sensor Valid for Print Stop
[Code]
ASCII
ESC c
4
n
Hexadecimal
1B
63
34
n
Decimal
27
99
52
n
[Range]
0
n
255
[Outline]
• This command selects in which status of the no-paper Sensor printing should be stopped.
Each bit has the following different meanings.
[Caution]
• It is possible to select multiple sensors as a printing stop condition, but if any one of them
detects the no-paper condition, the printer will stop printing.
• The printer stops printing after printing the on-going line and feeding the paper. If the panel
switch is disabled at this time, the printer will release the paper automatically and waits for
new paper to be set.
[Default]
n = 0
[See Also]
ESC c 5
Bit
Sensor
Hexadecimal
Decimal
0
Undefined
–
–
1
Undefined
–
–
2
Undefined
–
–
3
Undefined
–
–
4
TOF sensor disabled
00
0
TOF sensor enabled
10
16
5
BOF sensor disabled
00
0
BOF sensor enabled
20
32
6
Undefined
–
–
7
Undefined
–
–