Xerox 6100 Benutzerhandbuch
Seite 91
Cleaning the Printer
Everyday Operations and Printer Care
3-37
Caution: If you have a duplex unit installed, make sure you have opened the
duplex unit top cover before completing the following step. Forced opening of the
printer top cover first may damage the unit.
2
Pull the latch to release the top cover, and then open the cover.
»
Note: The above illustration shows the printer without the duplex unit. The
cleaning instructions for models with and without the duplex unit are the same.
3
Using a dry cotton cloth, clean the paper exit rollers.
While manually rotating each paper exit roller, clean each roller.
4
Close the printer’s top cover.
5
If you have a duplex unit installed, close the duplex unit rear cover.
6
Plug in the printer, and turn it on.
»
Note: In compliance with UL guidelines, “The appliance inlet is considered to be
the main disconnect device.”
P ap e r e xit rolle rs