Zanussi ZWH6140P - Handbuch (Seite 13)

PUSH
REM
O VE
TO
C
LEA
N
PUSH
RE
M
O VE
TO
C
LEA
N
If the flap is not in the desired position:
• Remove the drawer. Push the drawer edge
outwards where indicated by the arrow
(PUSH) to facilitate drawer removal.
The flap is down and you wish to use
powder detergent:
• Rotate the flap up-
wards. Ensure to fit
the flap completely
in.
• Carefully put the
drawer back.
• Measure out the
detergent.
• Pour the powder
detergent into the
main wash com-
partment
.
The flap is up and you wish to use liquid
detergent:
• Rotate the flap
downwards.
• Carefully put the
drawer back.
• Measure out the detergent.
For the quantity of detergent, refer al-
ways to what is written on the product
packing and ensure that the detergent can be
poured in the drawer.
• Pour the liquid detergent in the compart-
ment without exceeding the limit indica-
ted in the flap. The detergent must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
Warning! Do not use the flap in "DOWN"
position with:
• Gelatinous detergent or thick detergent.
• Powder detergent.
• With programmes with prewash.
• Do not use liquid detergent if the washing
programme doesn't start immediately.
In all above listed cases, use the flap in
"UP" position .
Measure out the fabric softener
Pour fabric softener
or any additives into
the compartment
marked
(do not
exceed the «MAX»
mark in the drawer).
Any additives must
be placed in the ap-
propriate compart-
ments of the dispens-
er drawer just before
starting the wash pro-
gramme.
13
www.zanussi.com