Zanussi ZWH6140P - Handbuch (Seite 16)

5
Delay Start
l e t s t i u t r a t S
é r é f f i d t r a p é D
3H 6H 9H
The start of the programme can be delayed by 9, 6 or 3 hours
by means of this button. The relevant light illuminates.
You must select this option after you have set the programme
and before you start the programme.
Select a delayed start:
• select the programme and the required options;
• select the delay start by pressing the button 5;
• press the button 7:
– the appliance starts its hourly countdown.
– The programme will start after the selected delay has ex-
pired.
Cancelling the delayed start after having started the
programme:
• set the appliance to PAUSE by pressing the button 7;
• press the button 5 once, the light relevant to the selected
delay goes off;
• press the button 7 again to start the programme.
The DELAY START cannot be selected with the drain pro-
gramme.
Important! The selected delay can be changed only after se-
lecting the washing programme again. The door will be locked
throughout the delay time. If you need to open the door, you
must set the appliance to PAUSE (by pressing the button 7)
and then wait a few minutes. After you have closed the door,
press the button 7 again.
6.1
6.2
6.3
Indicator pilot lights
Einde
Fin
Extra spoelen
Rinçage plus
Hoofdwas
Lavage
• When you start the programme by pressing the button 7,
the washing phase pilot light (6.1) illuminates. This means
that the appliance is operating.
• The additional rinses pilot light (6.2) illuminates when the
appliance performs an extra rinse.
• When the programme has finished the end cycle pilot light
(6.3) comes on.
16
www.zanussi.com