Amd cool ʻnʼ quiet function [enabled – Asus M2N32-SLI Deluxe Benutzerhandbuch
Seite 92
4-26
Kapitel 4: BIOS-Setup
CS/ODT Setup Time
Konfi gurationsoptionen: [Auto] [1/2 MEMCLK] [1 MEMCLK]
Address/Command Fine Delay
Konfi gurationsoptionen: [Auto] [No delay] [1/64 MEMCLK delay] [2/64
MEMCLK delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64
MEMCLK delay]...[30/64 MEMCLK delay] [31/64 MEMCLK delay]
Address/Command Setup Time
Konfi gurationsoptionen: [Auto] [1/2 MEMCLK] [1 MEMCLK]
Read DQS Timing Control
Konfi gurationsoptionen: [Auto] [No delay] [1/64 MEMCLK delay] [2/64
MEMCLK delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64
MEMCLK delay]...[46/64 MEMCLK delay] [47/64 MEMCLK delay]
Write Data Timing Control
Konfi gurationsoptionen: [Auto] [No delay] [1/64 MEMCLK delay] [2/64
MEMCLK delay] [3/64 MEMCLK delay] [4/64 MEMCLK delay] [5/64
MEMCLK delay]...[46/64 MEMCLK delay] [47/64 MEMCLK delay]
DQS Receiver Enable Timing
Konfi gurationsoptionen: [Auto] [0 ps] [50 ps] [100 ps] [150 ps] [200 ps]
[250 ps] [300 ps] [350 ps] [400 ps]...[8550 ps] [8600 ps] [8650 ps] [8700 ps]
Output Driver Control
CKE Drive Strength
Konfi gurationsoptionen: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
CS/ODT Drive Strength
Konfi gurationsoptionen: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
Add/CMD Drive Strength
Konfi gurationsoptionen: [Auto] [1.00x] [1.25x] [1.50x] [2.00x]
MEMCLK Drive Strength
Konfi gurationsoptionen: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
Data Drive Strength
Konfi gurationsoptionen: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DQS Drive Strength
Konfi gurationsoptionen: [Auto] [0.75x] [1.00x] [1.25x] [1.50x]
DRAM Drivers Weak Mode
Konfi gurationsoptionen: [Auto] [Normal] [Weak]
SLI Ready Memory [Disabled]
Hier können Sie das SPD-Profi l für SLI-bereite Speichermodule auswählen. Die
Konfi gurationsoptionen variieren je nach installiertem Speichermodultyp.
Konfi gurationsoptionen: [Disabled] [Optimal] [High Frequency] [High Performance]
AMD Cool ʻnʼ Quiet Function [Enabled]
Aktiviert oder deaktiviert die AMD Cool ʻnʼ Quiet-Technologie.
Konfi gurationsoptionen: [Disabled] [Enabled]