Clearaudio CONCEPT MC - Handbuch (Seite 5)

Concept
MC
User manual / Bedienungsanleitung
Page/ Seite 4  clearaudio electronic GmbH 2014
3. Set up
The set up of the Concept - turntable is easy as the turntable chassis, tonearm and the
cartridge are pre-assembled and all parameters have been already adjusted and tested at
the Clearaudio factory.
The Concept - turntable requires a place for set-up of at least 17 inch x 14 inch.
1.)
Please take first the Concept - turntable chassis out of the package and place it on a
suitable surface. After that please take the accessory box out of the package.
2.)
Please remove the adhesive security tape from the sub-platter. PLEASE RETAIN ALL
ORIGINAL PACKAGING. You will need it, if your turntable needs to be transported and/or
shipped.
3.)
Take the drive belt out of the accessory box and place it around the sub-platter and around
the motor pulley.
4.)
Take the platter out of the package and place it carefully with both hands onto the shaft.
5.)
Now remove carefully the adhesive security tape
from the tonearm and the MC cartridge.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You
will need it, if your turntable needs to be
transported and/or shipped.
Pic. 2: Removing the security tape
Pic. 3: Set up of the platter
Pic. 4: Removing the tapes