Clearaudio EMOTION SE - Handbuch (Seite 14)

Emotion SE
User manual / Bedienungsanleitung
Page / Seite 13  Clearaudio electronic GmbH 2013
Now connect your Satisfy Carbon - tonearm with the phono input of your phono-preamplifier.
You can find more information on adequate phono-preamplifiers and interconnects on our
Website: www.clearaudio.de
Only if you have static problems with your record, then it is
necessary to ground your bearing. Please connect the ground
wire with the bearing on the upper side of the chassis
(see pic. 15).
The set up is now completed.
Please pay attention!
If the Emotion SE is a longer time not in use, please switch the turntable on the main switch
on the motor completely off!
You will find the main switch on the motor (see picture):
We wish you a lot of pleasure with your new
Emotion SE - turntable.
Your Clearaudio-team
Pic. 15: Connecting the ground wire to
the turntable
I = ON
O = OFF
Pic. 16: Main switch