Clearaudio SOLUTION - Handbuch (Seite 8)

Solution
User manual / Bedienungsanleitung
Page / Seite 8
 clearaudio electronic GmbH 2008
4. Service
If the platter (without drive belt) does not turn as easy as usual, you should squeeze a up to 5mm
long line of the bearing grease into the upper part of the platter bearing. You will have the same
problem, if there is too much grease inside the bearing.
If any service or repair on all clearaudio products is necessary, please contact your dealer /
distributor or contact clearaudio directly. We will inform you about your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be transported and/or
shipped.
Accessories:
Extra : Acrylic dust cover for the clearaudio Solution turntable (Art.No.: AC 030)
Extra : Additional tonearm base with custom cut for all known tonearms (Art. No.: AC 027)
Your clearaudio Solution turntable is upgradeable, for more information contact your dealer /
distributor or contact clearaudio directly.
Clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phon: +49-(0)1805/059595
www.clearaudio.de
www.analogshop.de
[email protected]