Clearaudio MAGNIFY (Radial) - Handbuch (Seite 5)

Magnify
User manual / Bedienungsanleitung
Seite/Page 5  clearaudio electronic GmbH 2014
2. Magnify – tonearm mounting
Please keep in mind that the following instructions are covering the mount of the
Magnify - tonearm on any Clearaudio turntable. Installation on other brand turntables is
possible, but not covered in this manual.
Please refer to the turntable manufacturer´s user manual.
2.1 Magnify - tonearm with VTA – Lifter:
1).
Slide the VTA-Lifter into the drilling of the tonearm base. Lock the VTA-Lifter with the
delivered screws on the bottomside of the tonearm base (pic. 3 ).
To pre-adjust the height of the tonearm in the VTA-Lifter, lift the VTA-Lifter up and loosen
the screws and slide the tonearm shaft to the required position.
After adjustment of the tonearm height tighten the screw again. For the final height
adjustment the cartridge should be mounted.
Pic. 2: Magnify tonearm with VTA-Lifter
Pic. 3: Set-up of tonearm base with VTA-Lifter
Pic. 4: Adjustment of the height of tonearm with VTA-Lifter Pic. 4.1: Adjustment of the height of tonearm with VTA-Lifter