Gossen DIGISKY Part 2 - Handbuch (Seite 14)

GOSSEN Foto- und Lichtmesstechnik GmbH 14
Acknowledge by pressing
the M key and assign the
flash unit / receiver to the
desired group with the ring
controller.
Acknowledge by pressing
the M key.
The device will now appear
in the device lists.
3.3.3
Saving Studiosets
You can save up to 3 studiosets in the DIGISKY. Each user (cams 1 through 3)
has its own memory.
In order to save an additional studioset, access the main menu from the
functions menu by pressing the menu key and select another user (cams 1
through 3).
Only the device ID and the RF channel are saved. Group assignment is
adapted during routine DIGISKY queries and can be changed at any time.
I After a studioset has been saved, new flash units / receivers detected during auto scanning
are added to the list. The “new” set can be saved.
I After the DIGISKY has been switched off (manually or automatically), you will have to remain
in the functions menu for up to 30 seconds (depending on the number of receivers) in order to
allow the DIGISKY to address all receivers and include them in the device list.
Otherwise, receivers/modules included in the device list might appear as offline (OFFL).
3.3.4
Clearing Studiosets
Stored studiosets can be cleared. Be sure to select the correct user (cams 1
through 3) for deletion (visible in the functions menu).