Gastroback 42636 Design Espresso Machine Advanced Control - Handbuch (Seite 22)

60
• Bewegen Sie den Dampfwahlschalter in
die CLOSED-Position vor dem Herausneh-
men der Milchschaumdüse aus der Milch.
• Set the jug to one side, lift the steam le-
ver to purge out any residual milk from the
steam wand and wipe steam wand with a
damp cloth.
• Tap the jug on the bench to collapse any
bubbles.
• Swirl the jug to “polish” and re-integrate
the texture.
• Pour milk directly into the espresso.
• The key is to work quickly, before the milk
begins to separate.
hinTs & Tips:
• Always use freshly ground coffee for a
superior flavour and body.
• Use freshly roasted coffee beans, with a
‘roasted on’ date and use within 2 weeks of
‘roasted on’ date.
• Store coffee beans in a cool, dark and
dry container. Vacuum seal if possible.
• Buy coffee beans in small batches to red-
uce the storage time and store no more than
one weeks supply at any time.
• Grind beans immediately before brew-
ing as ground coffee quickly loses its flavour
and aroma.
Care & Cleaning
Cleaning CYCle For
• CLEAN ME! will be displayed on LCD to
indicate when a cleaning cycle is required
(approx. 200 shots).
• Insert the supplied cleaning disc, follo-
wed by 1 cleaning tablet into the 1 CUP
filter basket.
• Insert the portafilter and lock into group
head.
• Ensure the water tank is filled with cold
tap water.
• Place the jug or a 500ml container be-
neath the group head.
• Press MENU button until CLEAN CYCLE
icon flashes and PUSH is displayed on the
LCD screen.
To start the Clean Cycle press the illumina-
ted MANUAL button.
• The CLEAN CYCLE icon will flash and the
machine will start to countdown from 320
seconds.
• When the cleaning cycle has finished, re-
move the filter holder and ensure the tablet
has completely dissolved. If the tablet has
not dissolved, repeat the steps above, wit-
hout inserting a new tablet.
• Rinse the filter basket and portafilter tho-
roughly before use.
insTalling waTer FilTers
1. Soak filter in a glass of water for 5 mi-
nutes.
2. Rinse the filter and mesh under running
water.
3. Assemble filter into filter holder.
4. Set replacement date forward 2 months.
5. Install filter holder into water tank.
6. Insert water tank into the machine. Ensure
the latch is locked into position.
CauTion: Do not descale this machine.
Change filters regularly. Contact Gastro-
back customer service centre for advice.
Cleaning The sTeaM wanD
• Wipe the steam wand with a damp cloth
& purge directly after texturing the milk.
• If the any of the holes in the tip of the
steam wand become blocked, ensure the