AUDIOLINE Power PMR 40 - Handbuch (Seite 29)

9
GB
Operating the Walkie-Talkies
Searching for a channel
Signals are searched for in the eight channels in a continuous
cycle. The
icon appears in the display. If an active channel
is detected, the channel search stops. The Ready LED flashes
once per second.
Press the
PTT button to enable radio communication.
If the PTT button is not pressed or the channel is inactive,
channel search resumes after five seconds.
Start / End channel search
Start/End the search for a channel
Resuming search for a channel
/ Continue the search for a channel
Excluding a channel
If a channel found during the channel search process should not
be considered for subsequent use, it can be excluded. All the
channels are taken into consideration again when a new chan-
nel search is started.
/ Press and hold down. The channel is excluded
and the channel search automatically resumed.
☞
It is possible to exclude all channels with the exception of
the “home channel“. The “home channel“ is the channel you
currently configured, when start to scan, the radio searches from
home channel.