Operating elements, 2 operating elements – AUDIOLINE Baby Care 12 Benutzerhandbuch

Seite 17

Advertising
background image

GB

3

Operating Elements

2 Operating Elements

Transmitter (Baby unit)

1 Power

LED

Steady green during normal operation (parent unit and baby unit linked); flashes green during
establishing the connection to the receiver or when the connection is lost; lights red when the bat-
teries are running low.

2 On/Off

key

Press and hold down for approx. 2 seconds to switch on the unit.
Press and hold down for approx. 2 seconds to switch off the unit.

3 Volume

keys

For setting the volume of lullabies and for the voice transmitted from the parent unit.

4 Lullaby key (only when baby unit is switched off)

Press and hold down for approx. 2 seconds to switch on/off the lullaby function.

5 Night

light

key

Press and hold down for approx. 2 seconds to switch on/off the nightlight function.
When the nightlight is switched on, you can reduce the brightness by one level by pressing the key
briefly (3 levels of brightness). The nightlight can also be used when the baby unit is switched off.
When operating on batteries the nightlight switches off automatically after 5 min, to save energy.

6 Paging

key

Press briefly to “page“ the parent unit with an audible alert.
Useful to call for assistance or to locate a missing parent unit.

7 Temperature

Sensor

8 Battery

compartment

(rear)

Compartment for 2 AAA batteries (not provided) for backing up the baby unit during a power
failure.

9 External

MP3

player

jack

10 Power supply jack

Zero emission

The baby unit is equipped with a special transmission technology. When the baby unit stays at stand-by
and no noise or baby crying is detected, it does not transmit any radiation power. When the unit detects
any sound which is higher than the sensitivity level, it starts to transmit a signal to the parent unit in
order to establish digital communication. This may take up to 3 seconds.
The VOX mode must be set to ON for this mode of operation. If the VOX mode is set to OFF, the
parent unit will continuously monitor all audible signals and thus the ECO mode will not be applicable.

Due to this technique it may take up to 2 minutes to indicate a lost link.

2

1

3

6

8

9

10

7

5

4

Advertising