Clearaudio Tangent (Tangential) - Handbuch (Seite 16)

Tangent
Bedienungsanleitung / User manual
Page / Seite 16  clearaudio electronic GmbH 2015
1. Package contents
The clearaudio-
Tangent tonearm is delivered in a special packaging to ensure its safe
transport. Please check the contents as shown in the picture below and in the list on
the next page.
Important note :
Please note while unpacking your clearaudio-
Tangent tonearm, that the headshell-
carriage is hanged out in order to ensure safe transport as shown in the picture below.
To set the carriage please hold the tonearm with one hand (RCA-Sockets now show
backwards) and bring with the other hand the cable-lead through the outlet in the
acrylic-cover. Now place first the right wheel onto the rope and make sure, that the
bow mounted on the carriage now sits below the rope and then place the second wheel
onto the rope.
Note: all windings are metrical !
1. Tangent complete preassembled 6. 3x screws M4x25 to mount the
tonearm base
2. High-precision Dural-Aluminium
tonearm base
7. 3 x Hex key wrenches
3. Headshell for the cartridge 8. screwdriver
4. Precision level gauge 9. 3x Weights to adjust stylus pressure
( 2gr. / 4gr. / 6gr.) of the cartridge
5. Alignment gauge to provide tangential
tracking
10. Warranty card and clearaudio
Quality Card (not shown)