Preparing the product for use / installation, Setting the time, Installation – Auriol Z30238 Benutzerhandbuch
Seite 7

9
GB/IE
˽
Insert a battery 1.5 V
9999999P9 9;ŝ ů%Ϳ ŝ !9!
battery compartment
7
.
Note: Make sure you fit the battery the right way round (polarity).
The correct polarity is shown inside the battery compartment
7
.
˽
Close the cover
6
.
Note: The clock starts to operate as soon as the battery is inserted.
©
Setting the time
˽
To set the time, turn the small wheel
8
until the hands are in the
desired positions (see Fig. B).
Note: The temperature display cannot be changed.
©
Installation
Note: The bathroom clock can be hung on the wall using the suction
cups
4
or the hanger
1
or be mounted on the stand
5
.
Suction cups:
Note: The surface on which the bathroom clock is to be fixed using
the suction cups must be clean, dry and free of grease.
˽
Screw the suction cups
4
anticlockwise into the hanger
1
and
mounting holes (for suction cup)
2
(see Fig. A).
˽
Hold the bathroom clock against the wall so that the four suction
cups
4
are in contact with the wall and press the bathroom clock
against the wall until all the air has been expelled from the suction
cups
4
.
Preparing the product for use / Installation
53690_aur_Bad_Wanduhr_content_LB3.indd 9
28.06.10 16:18