Names of parts, Before using for the first time – Silvercrest STYG 2000 A1 Benutzerhandbuch

Seite 8

Advertising
background image

6

3. Names of parts

(see fold-out page)

1

Temperature regulator
– used to switch the appliance on and

off

– and to control the cooking

temperature

2

Indicator light
– lights up while warming up

3

Mains cable

4

Handles
– to avoid burns, only hold the grill

plate

6

by the handles

5

Base section

6

Grill plate
– used for cooking and grilling

7

Fat drain
– excess fat runs through this opening

into the drip tray

9

below when

cooking

8

Connection socket for the temperature

regulator

1

9

Drip tray
– to catch excess fat

10

Wooden spatula
– used for turning and removing the

grilled or cooked food

4. Before using for the first time

During manufacture, many parts are given a
thin film of protective oil. Before using the
appliance for the first time, heat it up without
any food so that any residues can evaporate.

Note:

When heating up for the first few

times a slight smell may be produced. Make
sure the room is adequately ventilated.
1. Take the appliance and all the accessory

parts out of the packaging.

2. Check that the appliance shows no signs

of damage.

3. Remove any labels or stickers (but

not

the type plate on the underside).

4. Clean the appliance before using it for

the first time. Observe the information in
the chapter entitled "6. Cleaning" on
page 8.

5. Select a location that is firm, level and

not flammable. Maintain a distance of
approx. 50 cm from other objects.

6. Turn the temperature regulator

1

to "0".

This switches the appliance off.

7. Plug the temperature regulator

1

into the

connecting socket

8

.

8. Plug the mains plug into a suitable wall

socket (see "8.

Technical data" on

page 9).

9. Turn the temperature regulator

1

to "5".

The indicator lamp

2

lights up and the

appliance heats up.

10. Leave the appliance switched on until the

indicator lamp

2

goes out.

11. Switch the appliance off by turning the

temperature regulator

1

to "0".

12. Pull out the mains plug and allow the

appliance to cool down.

13. Wipe the grill plate

6

again with a

damp cloth. The appliance is now ready
to use.

RP64786 Teppan LB-So Seite 6 Freitag, 29. April 2011 12:13 12

Advertising