Canon XEED SX800 - Handbuch (Seite 124)

IP-Adresse einstellen (SX80)
124
■Fehlermeldung
Wenn im Projektor ein Fehler auftritt, werden die folgenden Benachrichtigungen
gesendet.
Fehlerliste
* Wenden Sie sich hierfür an Ihren Canon-Händler.
Fehler bei
Temperatur
Fehlername Temperature abnormality
Text
The temperature inside the projector is too high for
some reason or the outside air temperature is higher
than the specified one. If the problem is inside the pro-
jector, check whether the projector is installed and
operated normally, turn off the projector to cool its
inside, and retry projection. If the same warning occurs
again, the projector may be defective. Contact your
dealer.
Fehler in Bezug auf
Lampe
Fehlername Faulty lamp
Text
The lamp has burnt out. Replace the lamp with a new
one. If the same warning occurs again, the lamp drive
circuit may be defective. Contact your dealer.
Fehler in Bezug auf
Lampenabdeckung
Fehlername Faulty lamp cover
Text
The lamp cover is open. Check whether the lamp cover
is installed properly. If it is installed properly, the lamp
cover detection switch may be defective. Contact your
dealer.
Fehler in Bezug auf
Lüfter
Fehlername Faulty cooling fan
Text
The cooling fan or another component may be defec-
tive. Contact your dealer.
Fehler in Bezug auf
Stromversorgung
Fehlername Faulty power supply
Text
The voltage of part of the power supply is abnormally
high or any other problem has occurred in the power
supply. Contact your dealer.
Andere Fehlerarten
Fehlername Unknown Error
Text Codes in Hexadezimalzahlen*