Beko DPU 8306 GXE - Handbuch (Seite 59)

59 / 64 EN
Dryer / User Manual
7
Maintenance and cleaning
Service life of the product extends and frequently
faced problems decrease if cleaned at regular
intervals.
B CAUTION: Unplug the product from
the mains during any maintenance and
cleaning works (control panel, body, etc.).
7.1 Lint Filter / Loading Door Inner
Surface
Lint and fiber released from the laundry to the air
during the drying cycle are collected in the Lint
Filter.
C
Such fiber and lint are generally formed
during wearing and washing.
A
CAUTION: Always clean the lint filter and
the inner surfaces of the loading door after
each drying process.
C
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
1. Open the loading door.
2. Remove the lint filter by pulling it up and open
the lint filter.
3. Clean lint, fiber, and cotton raveling by hand or
with a soft piece of cloth.
4. Close the lint filter and place it back into its
housing.
C
A layer can build up on the filter pores that
can cause clogging of the filter after using
the machine for a while. Wash the lint filter
with warm water to remove the layer that
builds up on the lint filter surface. Dry the
lint filter completely before reinstalling it.
C
Clean the entire inner surface of the
loading door and loading door gasket.
7.2 Cleaning the sensors
There are dampness sensors in the machine that
detect whether the laundry is dry or not.
To clean the sensors:
1. Open the loading door of the machine.
2. Allow the machine to cool down if it is still hot
due to the drying process.
3. Wipe the metal surfaces of the sensor with
a soft cloth, dampened with vinegar and dry
them.