Beko DPU 8305 XE - Handbuch (Seite 43)

43 / 64 EN
Dryer / User Manual
3
Installation
To make the product ready for use, make sure
that the electricity and water drainage systems are
appropriate by reading the information/instructions
given in the user manual. If they are not, call a
qualified technician and plumber to have any
necessary arrangements carried out.
C
Preparation of the product's location
as well as the electrical, clean water
and waste water installations is under
customer's responsibility.
A
CAUTION: Prior to installation, visually
check if the product has any defects on
it. If so, do not have it installed. Damaged
products cause risks for your safety.
A
CAUTION: Let your dryer wait for 12
hours before starting to use it.
3.1 Appropriate installation location
ƒ Install the product on a stable and level
surface.
ƒ Dryer is heavy. Do not move it by yourself.
ƒ Operate your product in a well ventilated,
dust-free environment.
ƒ Do not block the air ducts in front of and
under the product with materials such as long
pile rugs, wooden blocks and bands.
ƒ Do not install the product behind a door with
a lock, sliding door or a hinged door which
can strike the product.
ƒ Once the product is installed, it should stay at
the same place where its connections have
been made. When installing the product,
make sure that the rear wall of it does not
touch anywhere (tap, socket, etc.). Also pay
attention to select an installation location
which you will not be required to change
afterwards.
ƒ Place the product at least 1.5 cm away from
the edges of other furniture.
B
CAUTION: Do not place the product
on top of the power cord.
3.2 Removing the transportation
safety assembly
A
CAUTION: Remove the transportation
safety assembly before using the product
for the first time.
1. Open the loading door.
2. There is a nylon bag inside the drum that
contains a piece of styrofoam. Hold it from its
section marked with
XX XX.
3. Pull the nylon towards yourself and remove
the transportation safety assembly.
A
CAUTION: Check that no part of
the transportation safety assembly
remains inside the drum.
3.3 Under counter installation
ƒ This product can be installed under a counter
if the height of the counter is sufficient.
A
CAUTION: While using the under
counter dryer, never operate
the dryer without under counter
installation part.
Dryer Depth 60 cm 54 cm
Stock number
of under-bench
installation part
2979700100 2973600100
ƒ Leave at least 3 cm of space around the
sides and the rear wall of the product when
installing it under a counter or in a cupboard.