Spektrum SPMAR7110 Benutzerhandbuch

Seite 6

Advertising
background image

6

7

EN

AR7110/AR7110R User Guide

Spektrum AR7110 series receivers offer the ultimate system for high-performance

nitro or 500-class and larger electric helicopters. Combining the bullet proof radio

link of Spektrum DSM2 technology with a built-in regulator for the Rudder, Aux2,

Gear and Throttle channels and an integrated RevLimit limiter (AR7110R only), the

AR7110 series receivers make installation of these normally complex devices clean

and simple.
The AR7110 features a Fail-On soft switch to ensure reliability and heavy 16AWG

low resistance input power leads for uninterrupted power even under the most

demanding high-current draw applications. The newly developed backplate rpm

sensor makes this integrated receiver, limiter and regulator system the easiest and

neatest possible to install with only one external rpm sensor lead for the limiter.

Designed and developed by helicopter experts, the all-in-one integrated design

of the AR7110 takes the hassle out of installing and properly setting up separate

receivers, regulators and limiters.
The AR7110/AR7110R full range 7-channel receiver features DSM

®

technology

and is compatible with all Spektrum™ and JR

®

aircraft radios that support DSM2

and DSMX technology including: JR12X, 11X, X9503, X9303, Spektrum DX8,

DX7, DX6i, DX5e and Module Systems.

NOTICE: The AR7110/AR7110R receiver is not compatible with the Spektrum DX6

parkflyer transmitter.
Features

• Regulated 5.2-voltage output to the Rudder, Gear, Aux 2 and Throttle channels

allowing the cyclic servos to be powered at high voltage for increased

performance while the gyro and throttle servos are powered by the necessary

compatible lower voltage (5.2V).

• AR7110R incorporates an integrated RevLimit limiter with backplate rpm sensor

offering the cleanest, easiest installation available.

• Easy-to-mount backplate RevLimit rpm sensor—with a single lead that plugs

into the receiver, eliminates the hassle of mounting magnets and brackets as is

the case for typical rpm sensors.

• Heavy-duty 16AWG input leads pre-wired with EC3 connector.

• Dual outputs on the Throttle and Aux 2 channels (regulated to 5.2 volts/

unregulated).

• One internal receiver and up to two remote receivers.

• Soft switch fails-on if the switch is damaged.

• Optional charge ON/OFF adaptor lead (included) allows charging, battery

monitoring and ON/OFF through one easily accessible lead.

• Two types of failsafe—SmartSafe (throttle only) and conventional failsafe (all

servos).

• QuickConnect - If a power interruption (brown out) occurs the system

reconnects in less than .25 seconds.

• Flight Log compatible.

•Compatible with all Spektrum and JR DSM2 full range radio systems.

• 2048 Resolution

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: