Philips BlueTouch-Schmerztherapiegerät - Handbuch (Seite 40)

Note: Make sure the BlueTouch Pain Relief Patch in the strap is located on the
area to be treated and the LED area is in contact with the skin.
4 Fasten the waistband with the Velcro fasteners and fasten the
shoulder straps to the two parts of waistband with the Velcro
fasteners.
Note: You can also fasten the shoulder straps crosswise. This may provide a
better fit in some situations.
treatment procedure
1 Press the mode button one or more times to select one of the three
treatment modes.
2 When you have selected the treatment mode (see section ‘Selecting
the treatment modes’ in this chapter), the LEDs of the selected
mode switch on in eye-safety mode.
3 Treatment starts after the BlueTouch Pain Relief Patch has been
placed on the skin and the sensor of the patch senses a temperature
of at least 33°C for at least five seconds.
, All LEDs of the selected mode light up at full intensity.
Do not intentionally touch the sensor in the centre of the BlueTouch
Pain Relief Patch when it is switched on.
Note: You can also place the patch on your back and then press the mode
button to select the treatment mode. In that case, the Blue Touch Pain Relief
Patch switches on in the selected mode within five seconds.
english
40