Clearaudio CONCEPT - Handbuch (Seite 6)

Concept
User manual / Bedienungsanleitung
Page/ Seite 5  clearaudio electronic GmbH 2014
6.)
As all parameters have been adjusted at the Clearaudio factory you only need to align the
turntable with the supplied level gauge.
Should the bubble of the level-gauge not be in the centre of the black circle, you can achieve
the perfect levelled position by screwing the feet of your Concept – turntable while turning
them clock or counter clock wise till you reach the levelled position. Please fix the ideal
position of the spikes by using the lock screw again.
Only if the turntable is in the ideal levelled position you will get the best sound out of your
Concept - turntable.
8.)
Connect the one side of the supplied external Power supply to the socket on the backside of
the Concept – turntable and the other side to a live AC outlet. After that connect the
tonearm to your phonostage.
Your Concept - turntable is now completely set up and ready to play.
We wish you a lot of listening pleasure!
Pic. 5: Alignment of the turntable
Pic. 6: Height adjustment of the feet
Pic. 7: Connecting the Power supply
Lock screw