Clearaudio TT3 (Tangential) - Handbuch (Seite 7)

TT 3
User manual / Bedienungsanleitung
Seite / Page 7
 clearaudio electronic GmbH 2014
Pic.8: To seize the screw
Pic.10: Correct position of the headshell
Pic.9: Turning the headshell back Pic.8: Turning the headshell
Tighten the screw of the tonearm base
as shown in picture 6.
For the next step please remove first all counterweights from
the headshell.
Slide the headshell through the proper drilling in the
carriage of the tonearm.
When sliding the headshell, turn the headshell
(as shown in pic. 8) so that the positioning shaft of the
headshell can pass the main rod of the tonearm.
After passing the first main rod, turn the headshell back (as
shown in pic. 9)
Positioning shaft
Pic.6: Tighten the VTA-assembly
Pic.7: Setting up the headshell