AUDIOLINE BabySense5-Video - Handbuch (Seite 41)

5
GB
Operating the Transmitter
Check the transmitter and receiver are working properly each time before the equipment is put into
operation.
Switching the transmitter on/off
Position the transmitter in a good position for the monitoring tasks required and align the camera lens
to the area to be monitored.
Slide the switch to ON. The Power LED lights up.
The transmitter is now ready to operate.
To switch the unit off, slide the switch to OFF.
In the case of a low battery voltage, the Power LED flashes slowly.
In this event replace the 4 x AAA batteries with fresh alkaline cells.
Connecting and aligning the transmitter
a
Attention: Position the transmitter with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance. Point the upper section of the transmitter towards the
baby or object you want to monitor. Check that the baby or object is suitably displayed on the
receiver.
Night vision
The transmitter is equipped with 6 infrared diodes. This enables the transmission of pictures from
areas which are not illuminated. The night vision function is activated automatically when the light
conditions make it necessary.
When the night
−time vision function is activated, the screen display on the receiver turns to
black and white.
Operating the Transmitter