Fronius IG Public Display - Handbuch (Seite 23)

7
EN
Setting the
display values The settings for the Public Display are available in the „FRONIUS IG.access“ software.
You can select multiple values from the range of values for the system to be displayed
in succession. You can select a display period of between 1 and 60 seconds for each
value to be displayed. You can additionally specify one value as a favorite. This value
will be displayed between every second display value change.
Important! For detailed information on the „FRONIUS IG.access“ software, refer to the
operating manual „FRONIUS IG DatCom Detail“
The Public Display shows the selected values in a two-line display. Values are output as
follows:
-
Line 1: Displays a user-configurable text with a maximum of 8 characters. Use this
string to describe the selected value.
- Line 2: Displays the selected value and the appropriate unit. The Public Display
will automatically query the unit.
Important! The time and date display reserves the first line for the date and the second
line for the time display. The display does not allow you to assign a user-configurable
text string in this case.