Making system settings – Fronius SolarWeb Benutzerhandbuch
Seite 20
Advertising
8
Making System Settings
Making System
Settings
Fig. 7 Enter module power in Wp
You can enter module power data and data for connected sensor channels in the Set-
tings menu. This information is required for analysis and display in SolarWeb.
1.
Go to the ‘PV Systems / Your own PV systems / System name / Settings’ menu
2.
Select the SolarWeb menu
3.
Click on the module power icon (1) to enter data
4.
Enter module power in Wp and confirm
(1)
Before System
Setup
Before system settings can be made, Datalogger data must first be sent to SolarWeb. To
be able to send data to SolarWeb, you must make the correct settings in FRONIUS
IG.access. See chapter „Settings in FRONIUS IG.access.“
Advertising